SUPERPLUS MODULAR COLD CHAMBER

Cold Rooms made to measure

A wide range of modular cold rooms, designed and manufactured to make easier the work of the professional installer. The SUPERPLUS range of Taver uses the innovative technology Instaclack to offer you:

• 1200 cold rooms
• 24.000 versions
• Availability in 24 h

INSULATION

• Instaclack Panel made by two layers of steel sheets and inside Polyurethanne foam injected at high pressure.
• Average Density: 42-44 kg/m 3
• Conductivity Coefficient in all points: Group A following UNE 41950
• Floor 100mm on all ranges
• Thickness: 70 mm and 100 mm depending on the model.

FINISH

• White Lacquered Steel for roof and walls.
• Foodstuff Safe.
• Reinforced Anti-sliding Floor, suitable for static loads until 8.000 kg/m2 evenly distributed and 400 Kg of dynamic load, on 4 wheels (hand barrows).

INSTACLACK® FASTENING SYSTEM

• Incredibly Fast Assembly.
• Any cold room offers different Door Placements using the same panels.
• Guaranteed Hermeticity without using silicone or any sealing elements. The Instaclack System uses no metal angles or additional assembly accessories.

DOOR

• One pivoting door of net measures 1850 x 800 (hxw) mm, with antipanic opening device from the inside.
• One pivoting door of net measures 1850 x 800 (hxw) mm, with antipanic opening device from the inside.
• In Corner Rooms, different door measures depending on the model.

FREEZING COLD ROOMS (100 MM thickness)

• In cold rooms for freezing temperature, an electric resistor on the door frame and decompressing valve are provided. This last is essential due to the high hermeticity performance of the room.

PROTECTING PACKAGING

• Delivered in a protecting packaging specially designed for safe transport to assembly site.

• Pivoting door net measures 800 x 1850 or 590 (wxh) mm (depending on the model) with an exclusive design, key lock and inside opening device, hinge at your choice.
• Sandwich Panel of injected Polyurethane of 100 mm thickness between two white galvanised steel sheets and a protecting plastic film.
• World Wide patented and exclusive fastening system: Instaclack
• Reinforced Anti-Sliding 100 mm Floor in all models. Suitable for static loads until 8.000 kg/m2 evenly distributed and 400 Kg of dynamic load, on 4 wheels (hand barrows only).
• Protecting Packaging.
• Assembly Drawings.
• Availabe in 5 days.
• Conductivity Coefficient in all points: Group A following UNE 41950